I’ve seen many different ladders used for photo displays and shelving, they are usually distressed in one way or another. I’ve had an old ladder sitting in the garage for many months just waiting for a make over. Round 3 of Crafting with the Stars offered up that opportunity when the theme of fabric was announced. I looked around and couldn’t find any Mod Podge ladders on the web, so that did it for me. While I didn’t advance to round 4, I did get to complete a project that I’ve been wanting to do for ages! I had a blast participating in CWS and can’t wait to see what the final 3 ladies create in round 4. For now though, I’ll share with you how I made this shabby chic decoupage ladder.
I didn’t just use Mod Podge and fabric on the ladder rungs, I also put it on a wooden letter and covered 5 hard bound books with it. I learned a neat-o trick from Amy at Mod Podge Rocks, my star partner. In this post about her fabric covered table, she tells you to prepared the fabric first by placing it on waxed paper then covering the fabric with decoupage. It makes the fabric easy to cut and eliminates the possibility of fraying. I wish I would have known that when I made this tie dye decoupage monogram frame! I had all kinds of issues with fraying on that. As you can see from the close up of the letter F, it cut beautifully!
Decoupaged Wooden Letter
Again, I reiterate, brilliant idea to prepare the fabric with a layer of Mod Podge first. Meanwhile, paint the top raised area of the wooden letter, I chose a dark brown.
While the paint is still wet, hold it upside down and carefully press the letter down onto a clean sheet of white paper. Remove the letter and you’ve just created a pattern for cutting out your fabric. ;) Paint the entire letter brown and let dry.
When both the paper and the fabric are dry, peel the fabric off the waxed paper. Cut around the letter pattern, leaving about an inch or so all the way around. Place your pattern onto the wrong side of the fabric and pin in place. Cut through the pattern and the fabric to cut out your fabric letter.
Now just use Mod Podge to apply the fabric to your wooden letter.
Decoupaged Book Covers
I had some old books I had picked up at a thrift store that I thought were kind of cool. They ended up being worth nothing LOL so I just had them sitting on a shelf looking antique-like. I covered each of those books with fabric. Now if you don’t want to actually decoupage onto the hard bound cover itself, you can follow my instructions over at Kaboose for making a decoupage paper bag book cover.
I had to do a little trial and error to get a good system, so I’ll spare you the process of the first two books! Here’s what seemed to work best. lay your book down onto the fabric, leaving enough seam at the top (about an inch or so) to be able to fold it over. You want enough seam all the way around the book, so only trim the top and bottom and the left, do the right side last. This will account for the way the book lays open vs. closed.
Paint a layer of Mod Podge onto the cover of the book. Press and smooth the fabric to the cover but don’t add Mod Podge on the outside of the fabric yet. Close the book, then turn it so that the front cover is face down. Add some Mod Podge to the binding and to the back cover. Press and smooth fabric in place, but again, don’t add a top coat of Mod Podge yet.
Open the book in front of you. Make diagonal cuts in the fabric as indicated in the picture above for each corner of the book. Cut diagonals toward the binding as well, then trim off that extra strip of fabric at the binding.
Close the book except keep the cover open. Paint some Mod Podge onto the left, bottom and top edges of the inside of the book cover. Press and smooth the fabric and then add some Mod Podge to the top of the fabric as well. Place a piece of waxed paper on top of the decoupaged pieces and close the book. This will keep the wet decoupage from sticking to your first page, so don’t skip this step! Now just repeat this process on the back cover, then add a layer of Mod Podge to the outside of the book and place it on waxed paper to dry.
Decoupage Shabby Chic Ladder
For this ladder I actually wish I had put more paint on it than I did. But, it is what it is. :) Maybe another day. The painting and decoupaging was easy, the hardest part was tying all the items on and getting them to cooperate!
Here’s my old icky ladder, missing rung and all. Funny thing is, I spent over half an hour trying to unscrew the rusted out nut that was holding the wire in place. Then another 20 minutes searching for and finding wire snips, then trying to get the wire out from the missing rung. I finally got it out, but it turned out I could have left it in after all. See I ended up hanging a photo frame from that very section and stringing twine through the holes where the wire had been! It wasn’t my original intention for that area of the ladder, but that’s how it worked out. *sigh*
I painted the ladder lightly with a coat of this color called Toasted Nutmeg. It’s actually the color on my kitchen walls. Sounds weird, but you’ll love it :) I do! I’ll show ya later.
Then I added a coat of English Rose because I was just about out of Antique White. So I just added what I had left of the Antique White afterward. Then I sanded the edges and all areas to distress it. Still wish I would have done a thicker coat of white. Still may do that…
When the ladder was dry I brought it inside and put it on my dining room table. Ha ha. I know I know! I cut pieces of my chosen fabric to the length of the rungs and Mod Podged them on, making sure the seams were in the back. Didn’t really matter though, you really can’t see the seams now that it’s dry. I let the ladder dry overnight.
Ok good morning Bonnie. Get out of the ladder. :) After shooing the cat away, I used twine to tie various items to the ladder and there you have it!
Thanks for all of your votes and support for my projects during this fun competition!!