Want to spruce up your plastic patio chairs or those plain flower pots? Maybe your kids have outgrown some of their plastic play animals and you’d like to repurpose them. Whatever the case, just because it’s plastic does not mean it’s a lost cause. Here are the basics of painting on plastic.
What Can I Paint?
- Outdoor furniture
- Bottles and jars
- Storage containers
- Closet organizers
- Easter eggs
- Toys
- Trash cans
- Light switch covers
- Flowerpots
- Mirrors and frames
- Figurines
- Plastic foliage and flowers
- Décor accents
- Furniture
Tip: Check your storage shed for those outdoor items you no longer use. Visit a local thrift store for outdated plastic items such as wall hanging, frames, and figurines. Turn that trash into treasure with a fresh coat of paint.
Materials
- Drop cloth
, old sheet or newspapers - Fine grit sandpaper
- Sponge
- Dish soap
- Rubbing alcohol
- Clean towel
- Painter’s tape
- Spray paint designed for plastic
- Craft paint designed for plastic
, old sheet or newspapers
How to Paint Plastic
Prep your item:
Clean your item thoroughly with warm water and mild dish soap. Be sure to remove any grime or greasy residue. Rinse with clean water and dry with a soft cloth or towel. Wipe down the entire surface with rubbing alcohol and allow to dry.
Spread out a drop cloth or old sheet in a well-ventilated area, and set your item in the center.
Use a fine grit sandpaper to remove any and all shiny surfaces from your item. Be careful not to press too hard so as not to scratch the surface. Plastic is nonporous and removing its shiny surface will help your paint to adhere. Use a soft, clean brush or cloth to remove all dust from the sanding process.
Paint your item:
- Once your object’s surface is completely clean and dry, block off areas you don’t want painted with painter’s tape.
- Before painting, read the directions on your can of spray paint. Generally, you’ll need to thoroughly shake the can before starting, and in-between applications.
- To ensure you have a good can of paint, or even that it’s the right color, do a test spray on a piece of cardboard, newspaper or your drop cloth.
- To apply, position the nozzle toward your object, and spray a light, thin layer of paint. With this first layer, your object should not be fully covered. Give each layer a few minutes to dry before adding the next one. It should take multiple thin, even layers to refresh your item’s color without over-painting.
- Allow your item to dry completely before displaying or using.
Product Tips:
- As an alternative to sandpaper, you can purchase a product called liquid sander. Home Depot carries one called Klean-Strip. It cleans and removed shiny surfaces at the same time, helping to create a suitable surface for new paint. This product can be used indoors. There’s also one called Krud Kutter Prepaint Cleaner which cleans the surface and can be painted over after just ten minutes
- Use paints that are specifically formulated to adhere to plastics. There are several available on the market such as Krylon Fusion for Plastic®, Valspar® Plastic Spray Paint, and Rust-Oleum Specialty Paint For Plastic Spray.
- If using regular spray paint then your item will need to be primed. Use a specially formulated primer such as Rust-Oleum Specialty Plastic Primer Spray, Krylon CoverMaxx Primer, or XIM Plastic Bonding Primer.
- If you are painting smaller objects or need to add small details, you may find it easier to brush on your paint. Folk Art Multi Surface Acrylic Paint and Americana Multi Surface Acrylic Paint can be used on plastic making them ideal for recycled plastic bottles, clear cake stands and other small plastic items. Keep in mind that any tableware that you paint should not come in contact with a person’s lips. So if you are going to paint a plastic cup, keep paint 1-inch from the rim.
. It cleans and removed shiny surfaces at the same time, helping to create a suitable surface for new paint. This product can be used indoors. There’s also one called 
which cleans the surface and can be painted over after just ten minutes
, 
, and 
.
, 
, or 
and 
can be used on plastic making them ideal for recycled plastic bottles, clear cake stands and other small plastic items. Keep in mind that any tableware that you paint should not come in contact with a person’s lips. So if you are going to paint a plastic cup, keep paint 1-inch from the rim.Need some project ideas?
Here are a few creative painted plastic projects you might like:
- Plastic Spoon Garden Markers
- Faux Stained Glass Luminary
- Painted Resin Patio Chairs
- Plastic Spoon Mirror
- Outdoor Child Table Makeover
- Painted plastic pots
Here are some awesome tips for painting glass and how to choose which paint you need.
- Deco Mesh Poinsettia Flower - November 22, 2024
- Winter Luminaries: Snowy Pinecone Candle Jars - November 19, 2024
- Pinecone Owls - November 12, 2024
Ellie Hardie says
Hi there,
I charity shopped a really cute little trike for my niece’s birthday and wanted to repaint with her name and flowers but the wheels are plastic and a horrible shade of blue. if I paint the plastic wheels will this rub off and look tatty as she uses it? if I prime and seal will it be durable enough for the wheels?
Thank you!
Amanda Formaro says
I would suggest a spray pint made for plastic, you can usually find them at places like Walmart and Home Depot.
Donna says
Making kids Christmas ornaments!!
Use plastic ornaments, what’s the best finger paint tobusw
Olivia says
Hey! I’m looking to do a DIY painted laptop case! I’ve bought a hard plastic case & went to Michaels to ask someone what I could use on it & they said I could only use enamel paint. Has anyone ever used any other paints on hard plastic?
Lori Brinkerhoff says
Question! I want to paint some words/phrases and design on a portion of hard side luggage using a stencil (to personalize it and make is easier to recognize). The suitcase has a slight textured surface. Understanding that luggage is often treated a little rough, is it even feasible to 1. paint on plastic and 2. have it not get scratched/scuffed off. And if you think it’s possible, what would be the best paint for this type of project?
Thanks so much! I’m so glad I found this tutorial.
Lori
Amanda Formaro says
I would think the rough treatment of luggage would definitely scuff off your design. But if you still want to try it, either of the mult-surfaced paints linked in the “materials” section of this post would work.
Shara says
I would use a permanent adhesive vinyl. It can be cut with a cutting machine, like, Cricut, Silhouette Cameo or Brother Scan-n-cut. if you don’t have a cutting machine available, search for “custom decal” on Etsy. Lots of options there.
Karine says
Hello I have a old shampoo bottle that I to make a pencil case with and I want to add some color would oìl based markers or paint which one would adhere better to the bottle?
Rebekah Collins says
Hi,
I want to create a picture on the outside of some plastic ornaments and I was wondering what I need to do for that. I see so many different ideas for the inside, but I don’t want to do that.
Thanks
Amanda Formaro says
Are you planning on painting a picture on the outside? If so, any multi-surface acrylic craft paint will work. Make sure you use one of the sealers listed in the post to protect your work.
Teresa says
Hi Amanda, i’m using acrylic paint on diy plastic ornaments (inside bauble) but find its patchy once completely dry, any tips on how to avoid this?
Amanda Formaro says
It’s best to do multiple thin coats instead of less thicker coats.
Bev says
Hi Amanda,
I purchased a Playmobil house and would like to paint some of the furniture and floors to customize and make it more interesting (I’ve seen some ideas on Pinterest). Can you tell me the best paints to use? I could use Krylon fusion for the floors, but also want to add detail – like touches of gold and silver on the plastic furniture pieces. Can you recommend a good craft paint? Thanks, Bev
Amanda Formaro says
Any of the multi-surface craft paints will work!
Makenzie says
Hi, I was wondering how to paint on a plastic bag. I’ve fused plastic bags together and I made a reusable tote. I’ve read several different things but wanted to know what you would suggest. Thanks!
Amanda Formaro says
I would think that a spray paint would be the best. Try Fusion
Laurel says
I’m going to make a wreath out of grocery bag strips and a wire wreath form. As long as I clean everything with rubbing alcohol will a plastic spray paint be okay to use around the whole thing, including the wire form?
Laurel says
Also, how would I weatherproof it after it’s been painted?
Amanda Formaro says
Use an outdoor sealer spray. :)
Amanda Formaro says
That should work!
Laurel Peairs says
Thank you so much!
Kathy says
Hi Amanda. I have a small plastic Minnie Mouse toy I’m wanting to repair where the paint has rubbed off. Do you think that Patio Paint would stick to plastic?
Kathy
Amanda Formaro says
Hmm, I’m not sure if Patio Paint would work. However if you use a primer first it should be fine.
Kathy says
Thanks for your reply. Keep well.
Camden says
I meticulously painted a folding table for football tailgates and I used acrylic paint before I knew what I was getting myself into. I have Minwax polyacrylic paint and I also have mod podge clear spray. Which one would be the best to use to unsure no scratches and a waterproof table?
Amanda Formaro says
I think the Minwax polyacrylic paint would offer more protection
Hailey D. says
Hello, I’m wanting to paint a clear hard plastic phone case. I want it to remain clear and I can’t find clear primer. If I just sand it down with sandpaper, then paint acrylic paint on it, then seal it with a clear sealant, do you think that will work? I’m just wondering if I still need primer…
Amanda Formaro says
I think as long as you rough it up a little with a fine grit sandpaper yes that will work
Tracy says
I have just acquired two vintage plastic panels that appear to be from a late 1950’s/early 1960’s room divider. The panels are of peacocks and highly patterns with a lacy see through ivy surrounding the bird. My question is can I get the paint to adhere to this textured and detailed surface without damaging the intracacy of the panel? The plastic is yellowed and not very attractive as it is now. I want to paint a base coat and then use green, blue, purple – peacock colors. Will the paint stick without sanding the surface? Will multiple layers adhere? Thanks
Amanda Formaro says
It should, just make sure you clean it well, give it an rinse with rubbing alcohol and let it dry completely before painting. Let each coat cure completely before adding another.
Meaghan says
Hi there. I am looking to paint a plastic folding table. I am doing it detailed so I wont be able to spray paint. What kind of paint do you recommend? Also, do you recommend any primers to make sure the paint sticks? One last question, should I set it with resin or anything specific to make sure if anything spills it doesn’t ruin the paint?
Mikayla says
I’m thinking about painting the outside casing of an old Walkman I found… Since it’s a pretty small surface, I don’t really want to use spray… Any advice?
Amanda Formaro says
Any multi-surface craft paint should work.
Bridget says
Amanda, I am wanting to paint a Fisher Price Loving Family VW Bug. (Basically, a car for doll house people). Do you think acrylic paint will still make it turn out shiny? Also how do I keep from painting the spots I don’t want to paint on such a small object?
Amanda Formaro says
You can use painters tape to protect surfaces you don’t want to paint. For a glossy finish, use a gloss of semi gloss sealer https://shopstyle.it/l/bmzRT
Vanessa says
Hi Amanda,
I am wanting to paint a coffee machine which is plastic. I want to customise using paintbrushes and lots colours. What process and paints would you use for this?
I was thinking to clean, sand, gesso then multi surface acrylic paints, then a type of sealer?
Rusty says
I am painting my fenders on my four wheeler which is a hard plastic. Is there any other paint besides spray paint I can get for this job ? I would like to get a whole gallon and just apply with my spray gun .
Amanda Formaro says
Krylon makes a Fusion plastic paint in a can https://www.krylon.com/press-room/press-releases/2011/04/krylon-introduces-the-first-brush-on-paint-for-plastic/
Levi egwu says
Hi dear,
Good day, pls I want to paint on plastic ( polyethylene ) which pain is best ?
Thanks,
Levi.
Amanda Formaro says
Hi Levi. There are lots of suggestions within the post. Please check those out
Jenna says
how would I paint a calculator?
Amanda Formaro says
I would say you wouldn’t be able to paint the keys, wear from fingers would eventually remove the paint. For the outer casing you might be able to remove it and paint it that way. If not, you could cover the keys with th blue painter’s tape.
Sharise says
Why would you paint a calculator?
Victoria says
Hi Amanda,
I am wanting to paint some lettering on to signs for my wedding. They are clear acrylic boards so I am concerned about sanding them and them looking all rough, I want to maintain the clean clear look. I only really need it to last until the wedding, after that I will probably repurpose them. If I just painted on the acrylic would it work?
Thanks,
Victoria
Amanda Formaro says
Yes it should be fine. Just make sure they are clean and free from any oils that can be transferred from your skin. Rinse them with rubbing alcohol and let dry completely before painting.
Denise says
Hi there! Would using a primer and sealant that adheres to plastic help acrylic paint to better hold? I see that Rust-oleum has a spray on primer and sealant that could potentially work for this. I’m hoping not to make too many trips to get my next project done.
Amanda Formaro says
Yes a primer will help for sure
Dianne says
So I have a corn hike set that is plastic They were in my son’s trunk and the one that was on the bottom has been pretty badly scuffed up with most of the paint gone. Other than cleaning can I just paint over the design? I want to keep the original design but I am unsure it will adhere. Also is there a way to put an extra sealer on it?
Amanda Formaro says
Did you mean corn hole? If so, I would think that you could definitely add a sealer. Rustoleum makes one https://shopstyle.it/l/bmzRA
Richard says
The best way to get good adhesion is to “open” the plastic prior to painting. The most common method entails wiping the surface with acetone and quickly painting with a lacquer pant. The acetone melts a very thin layer of the plastic which mixes with the wet paint fusing it and making it a part of the plastic.
Destinee says
Hi! I’m currently turning a foldable plastic table into a customized beer pong table. Before I started I did not sand the table down. I painted (used acrylic paint and let it dry for two days), added my painters tape. As soon as I removed my painters tape all of the paint peeled off. What are your recommendations? Thanks!
Karyn says
Hi I was wanting to paint one of those plastic race car beds for my daughter. I was planning on sanding and priming before I painted it. I’m nervous about using spray paint/oil based paint on something my daughter will be spending a lot of time in. Do you have any recommendations for a paint that would still adhere well to plastic that would be less toxic? Thanks,
Amanda Formaro says
Once the paint dries and cures it’s totally fine. You can safely use spray paint as long as you do the spraying outside and allow it to dry according to the manufacturer’s directions.
Brandie Degan says
I would like to paint a plastic tray that is dishwasher safe. I want to use the kids hand prints and then write on it. Do you recommend I use this same process? How/what would I use to seal the paint so it can be used to put food on it from the grill?
Amanda Formaro says
To my knowledge, there are no craft paints that are approved by the FDA as food safe. Also, I wouldn’t put anything you paint into the dishwasher.
Talia Moncier says
I am wanting to do some homemade vases with my little girl using empty glass and empty plastic containers to give at church for mothers day. I purchased some apple barrel multi purpose paint that says it is dishwasher safe but I dont know if I need to put a sealer on them also cause we are putting fresh flowers in water.
Amanda Formaro says
As long as you are painting the outside only you should be fine without a sealer!
Dawn Robertson says
Hello! Do these hints, techniques, and tips apply to a sheet of Plexiglas too? I’m using it to create faux stained glass on a VERY limited budget. Thanks, Dawn
Amanda Formaro says
Hi Dwn. I don’t know for sure, but they should. I haven’t painted plexiglas before but the material is similar to plastic.
pam walkup says
i have ten tupperware clear storage containers from 1990. They have a yellow tint to them that looks awful. Is there a paint i can use to spruce them up? or any ideas as what i can do with them to get rid of that yellowish stain?
Amanda Formaro says
Unfortunately because they 1) will be washed often, and 2) will be used with food, I can’t recommend painting them. After searching, I found a thread on a message board where people were talking about possible solutions for cleaning them. Here it is http://www.vendio.com/mesg/read.html?num=2&thread=407465 Good luck!
Agnes Hamilton says
I purchased plastic lemons but they are too bright yellow. How can I make them less vivid yellow?
Amanda Formaro says
Are you looking to just paint them a different color or dull the existing color?
Cathy says
Seriously? She stated “too bright” and “less vivid”.
Lynn says
Hi there!
I’m wanting to do some organizing and am on a limited budget. I’ve picked up some storage containers for both foods (like Tupperware type items) as well as their $1 storage bins to hold snacks and other items. We don’t have a pantry in our small kitchen, so my husband has made a pantry-like sliding door furniture piece that works great! While the bins will mostly be covered by the wooden sliding doors, I’d like for them to look nice and match the colors of our kitchen, instead of the bright blue, green, and pink!
My question for this is: in the case of the food containers, if I have a plastics jar with plastic lid, Am I able to spray paint the lid and still be able to wash it (preferably in the dishwasher)? And are you aware of any of the solutions for this would be food safe? I’m not quite as concerned about the storage bins, but in the case of using them for vegetables or fruits on the counter, I’d still like to be able to wash them and know they aren’t going to contaminate the foods with which they are in contact. Help! :)
Amanda Formaro says
I don’t think paint is the solution in this case. I’m not positive what type of storage containers you’re talking about, can you find a link to them and leave it here in the comments so I can have a look?
ann says
I would either find colors that match or if its open containers make a fabric liner so the items inside don’t touch the plastic surface.
Delphina says
I tried painting a Step 2 car as a super Mario Kart for my son’s Halloween costume its 3 colors. I sanded, primered painted one color let dry a day and mask off do the next color dry same thing do the last color let dry and why I come to take off the tape it completely go ruined! Chunks peeled off. I thought i did everything correctly but my Paint was the Rustolium Enamel and I even have a clear coat as well some peeled if clear was applied. Need help please! My paint won’t stick how many days do I need to let each color dry?
Amanda Formaro says
What was the temperature like outside where you were painting? If it was humid at all or if the temps were too cold the paint won’t cure properly.
cassie says
Hi Amanda:
For painting the underside of the seat and the back of a transparent plastic chair so that the painting can be seen from above the chair, is there a primer and a sealer that I can use that will not obscure the painting?
THanks!
Cassie
Amanda Formaro says
Hi Cassie! There are tons of clear sealers, as for primer, Rustoleum makes a clear spray primer. A quick google search revealed this (FYI I am not familiar with the store) https://www.zoro.com/rust-oleum-spray-primer-clear-11-oz-251572/i/G3548291/feature-product?gclid=Cj0KCQjwof3cBRD9ARIsAP8x70P29RZ4xl1EFvGwlkdmqKLmsMA_yNd8AO0Ya8zYU1twKvKehitB5owaAhSMEALw_wcB
Elizabeth Dansel says
Has anyone ever painted a Step 2 Push Car? I’m wondering if I need to sand it down first or use one of these: Klean-Strip/Krud Kutter Prepaint Cleaner before painted with one of the recommended spray paints above.
Amanda Formaro says
Is it similar to a Cozy Coupe? If it’s that plastic type car, you probably won’t need to sand it, but the Krud Kutter would be a good idea. Here’s a video of someone painting a Cozy Coupe https://www.youtube.com/watch?v=anHgF0Dfggc
Valerie says
I am looking to do the exact same thing. When I clicked on the YouTube Link – it didn’t work because the user set the video to private. Any updates? My paint didn’t dry well and my son scratched some off. Sadly, my work went down the drain…
Amanda Formaro says
Oh how weird – try this one https://www.youtube.com/watch?v=wBOsjl1V4ww
Maria says
Hello, I have bought myself a couple PVC Mannequin heads for my hats and I
would like to paint them but not sure what paints are suitable and would I need to
prime them first. Someone suggested Rustoleum Plastic primer spray and then use
acrylic paint but am worried incase I ruin them. What would you suggest?Ma
Thank you!
Amanda Formaro says
That’s what I would suggest as well! A plastic primer is perfect and after that acrylic paints will work great ;)
Cathe anderson says
Aloha, i like to create gifts with beads, vintage jewelry , decopauge, all types of embellishments on everything. I like to protect and shine the beads and jewelry. I have used clear top coat nail polish for the look I want. Sometimes it clouds and/or yellows. Any ideas . Also sometimes the sprays turn whitish. Help!!! I just want a nice clear glossy look. Mahalo, cathe pomaika’i
Amanda Formaro says
That’s a good question and not sure I’m qualified to answer it. I did some searching and there are claims that polycrylic won’t yellow, and Mod Podge also claims they won’t yellow. You may be better off speaking with an expert at a hobby shop. Honestly though, my first thought is those little Testors model paints – the clear coat – like this https://amzn.to/2xTVmOc
Kattie says
Was looking to paint a Big blue trashcan at the Ronald McDonald House, I want to add some art to it so it would be more inviting for our Pop Tab collections . This can stays indoors but I would hate for the paint to chop off easily. What paint do you suggest I use for this? ( not a great artist, but wanting to make it better!)
Amanda Formaro says
Hi Kattie :) You can use any multi-surface acrylic paint. Just be sure the surface is clean and dry before you begin. Allow the design to dry and cure for at least 2 hours, then spray with a clear sealer (any one of these will do the job http://amzn.to/2HKTyqN). Have a look above at the PRODUCT TIPS section and check out #4 for product suggestions for creating your design.
Bobbie says
Hi Amanda,
I need to paint on clear plastic jars and plastic terra cotta like containers. What paint do you recommend for full coverage on the these especially not to be able see through the clear jars.
Amanda Formaro says
Any of the products in #2 above in Product Tips would be great for this :)
Cindy Hernandez says
My daughter is doing a mural with plastic bottle caps. Which kind of paint do you recommend we use? Thank you
Amanda Formaro says
A multi-surface paint is your best bet, use multiple thin coats. You can find it at crafts stores, Martha Stewart, Plaid and DecoArt all carry a line.
Polly says
I want to paint some plastic bottles and use them a Mother’s Day presents for my kindergarten class. What type of paint should I use?
Amanda Formaro says
Hi Polly. In the article please look for the section called Product Tips. #4 is the section you will want to have a look at :)
Gay Negus says
Will painted plastic withstand the motion of feet from someone sitting in a computer chair with a painted plastic base?
Amanda Formaro says
I am not sure if it would. It may for a while with a few coats of sealer, but it may need to be touched up over time.
Erin Scanlan says
What kind of sealer would you recommend? In my case, for a vintage plastic toy that was my sister’s that I am refurbishing for a baby shower gift for her to give to her daughter. I would be brushing the paint on. But I was thinking a spray for the sealer.
Amanda Formaro says
Hi Erin. You can use any acrylic spray sealer, the more important aspect is the type of paint being applied to the plastic so it doesn’t peel. I have used several brands, including Krylon, Rustoleum Plaid and Aleene’s. Here’s several to choose from, just make sure you check the finish (depending on whether you want glossy or matte). http://amzn.to/2EpHD1c
Elisabeth says
Hello Gay & Amanda ( ♥️ Your site…esp. all the crafty tips – Being overseas and so far away from family & friends is hard enough but even more difficult to source craft items – Amanda would love to mail you private if possible)
So, Gay I was thinking about your dilemma – are you wanting to paint one of those ugly plastic carpet protectors that the desk chairs roll on? If so what about contact paper and then perhaps a coat of sealer or the clear contact paper for windows on top to protect the contact paper…that way you could paint and then cover – either/or ?Hope this helps!
PattP says
The plastic chair mat will flex and have too much pressure on the surface to use contact paper or paint, even with sealer, especially if it is on carpet. If the mat is clear, you could use spray paint for plastic on the underside, and if it’s the kind for flat floors, not carpet, it may eventually rub off, but should last quite a bit longer than painting it on top. Be sure to clean well and dry before painting. You won’t be able to use primer if you want to see the color underneath. I’d probably let it cure as long as a month before putting it down. The most curing will happen soon, but paint can become harder and tougher over time.
Marian says
Hi, Amanda,
A well-respected newsletter about children suggests that 2-4 month old infants can get a head start developing hand-eye coordination if this is done: “Paint some bright red polka dots on the white shield of a pacifier,” then mount the painted pacifier in the center of an 8″ diameter circle of white cardboard. The whole thing is tied to an upright crib rail about 8″ above the baby’s shoulder.
The idea is that the baby likes the look of this set-up (you can see why!) and swipes at it first with his fist, then with his open hand. The idea is NOT that the baby ever gets hold of it — you remove it before that happens. Also, you only have this available to the baby if an adult is nearby.
Any tips for painting on this kind of plastic (pacifiers)? Sandpaper versus liquid sander, spray paint versus brush, brush type, sealant?
Amanda Formaro says
Personally I wouldn’t recommend this because there’s always a chance the pacifier could end up in baby’s hands. Most commercial acrylic craft paints are non-toxic, but they aren’t approved by the FDA because the process for approval is so costly. Therefore manufacturers simply don’t do it.
In this particular situation the paint does not need to last for a truly long time. So just use the handle end of a paint brush, dip it in the paint and add polka dots to the plastic. Use a couple coats of sealer over it. This pacifier would never be used for any other purpose other than this so there’s no need to worry about the paint wearing off or not lasting over time.
Kingsley Dominic says
Please is there anything (like chemical) that needs to be applied first,on my art/craft/wood work,before doing the painting?Thank you!
Amanda Formaro says
If you can be more specific about your surface I can answer the question. Usually no, just follow the prep instructions in the article.
Buzzywuzzbums says
Thanks for you generosity of information. I found your site while researching the possibility of repainting a plastic bubble fountain. But alas, it needs repainting because the cats licked the paint off. I guess it’s a dead duck.
Mareli Benson says
Hi
I Want to paint milk bottles for my son’s market day at school.
What is the best paint to use that will not peel of?
Amanda Formaro says
In my experience a spray paint is your best bet, at least for the first coat. After the initial coat you could decorate with a multi surface acrylic.
Jessie Inman says
Would this work for clear plastic mason style jars as well?
Amanda Formaro says
Yes!
Cindy says
Helping my friend redo a plastic carousel horse and we need to repaint it. It will be very hard to do with a spray can, what do you suggest for us to use.
Amanda Formaro says
Any multi surface acrylic (should be linked in this article) should work. Just make sure you prep the surface and use good paint brushes.
Debbie says
Hi Amanda! I had some problems getting my acrylic craft paint adhering to the plastic container I was painting. I was brush painting and it took several coats and still looked “streaky”. Then I mod podged it only to realize if you touch it before it dries, it comes right off! :( Besides spray paint, is there a way to get it to adhere and look better? Thanks!
Amanda Formaro says
Hi Debbie :) It’s best to use a paint that is either deemed “multi-surface” or specific to plastic. There are several mentioned and linked in the post. You can also check the “prep” section of the post that mentions roughing up the surface with sandpaper first so the plastic has something to “grab” on to. Good luck with your project! :)
Ginger Rueve says
Can I use fabric paint on clear plastic quart containers?
Amanda Formaro says
Fabric paint is not formulated in the same way that multi-surface or plastic paint is. The safer bet is to get the appropriate paint for that surface. :)
Tamara says
Hi Amanda!! For fathers day I bought a plastic platter spray painted it white and then decorated with acrylic paint then sealed it with acrylic sealer I was just wondering will this be food safe or not??
Amanda Formaro says
Hi Tamara. No it’s not food safe I’m afraid. Most paint companies are making non-toxic paint these days, however the process of being approved for food safety is expensive so most of them do not go through the process. Therefore they cannot be deemed food safe (even if they may be). Safest bet is to get a clear Melamine or acrylic platter to place over the top of it.
Renee says
Have you ever heard of painting on eyeglasses? I have a few spares and wanted to spruce them up. I thought they would be great to leave in my craft room. What kind of paint is appropriate?
Amanda Formaro says
Hi, Renee! It depends on the material the frames are made of. Most sunglasses have plastic frames. If that’s the case, you can use a multi-surface acrylic paint to add designs to the frames. If you want to completely paint the frames, tape off the lens or removes them completely, then use a spray paint made specifically for plastic. You will want to make sure you allow them to dry thoroughly before wearing, I suggest a solid 48 hours. Good luck!
mohamed khaled says
is it work on plastic bags !!?
Amanda Formaro says
Painting on plastic bags is not really feasible since the bag will be moving constantly.
Alyssa says
I bought some plastic water bottles at the dollar tree and I want to paint the lids matte black. Is it safe to drink from painted lids? I was hoping to use spray paint. Which kind is safe to use?
Amanda Formaro says
Hi, Alyssa! I’m not sure I understand what type of water bottle you’re talking about. If you are referring to the portion of the bottle that lips will touch, I wouldn’t recommend painting that part.
Merlyn says
Can I paint wine bottles with acrylic paint ???please reply fast !!!
Amanda Formaro says
Hi Merlyn, yes you can. Wash the wine bottles well and give them a good rinse in rubbing alcohol. Make sure they are completely dry before painting. Paint thin coats and allow them to dry for at least 30 minutes in between each coat. Make sure you don’t touch the glass with your fingers if possible because the oils from your skin can repel the paint. Good luck!
Candra Comner says
I am painting an equestrian helmet for my Granddaughter, I’m an artist, I use acylic paint on canvas, but this will be a first for me with the helmet. The helmet is plastic I was thinking about using a spray paint to do the basic then do my art work with my acylic paint, then can I go over it with a clear gloss sealer? Dose acrylic go together with spray paint? Thanks Candra
Amanda Formaro says
Yes you can use acrylic over spray paint, just be sure to allow the spray paint to dry thoroughly between coats and before adding the acrylic. :)
Connie says
I would like to decorate clear plastic drink cups for a baby shower. Preferably with glitter / painted dots. Is this possible? Thank you in advance ?
Amanda Formaro says
Hi Connie. yes this can be done. First rule of thumb when painting cups that people will drink from is to not paint up near the rim. So make sure your designs are at least an inch below the rim. Paint the outside of the cups with a round sponge applicator to mke dots, or you can use the handle end of a large craft paintbrush dipped in paint. Look for a multi-surface glitter paint, Martha Stewart makes a nice line. Here are some examples http://amzn.to/2noiwW4 – just please keep in mind that washing the cups can cause the paint to peel after several washings. But if you are just using them for a baby shower you should be just fine!
Sherie says
Any suggestions on painting a Little Tykes Cottage or those heavy plastic dog houses? I am attempting to spruce up my backyard and my dog shelters are in need of a make over:)
Amanda Formaro says
Oh yes, those have definitely been done successfully. :) You can use any of the outdoor plastic spray paints, some should be listed in the post. You can see some of them here too – http://amzn.to/2nogQMa Just make sure you clean the surface really well first. Let the clean surface dry thoroughly and apply several light coats, not one or two thick ones. Thick applications of spray paint tend to run and don’t dry well. Be sure to follow the instructions on the back of the can as each manufacturer may have different instructions. Good luck!
Mary Cline Cline Dippold says
Can I paint plastic flower pots with craft paint instead of spray paint
Amanda Formaro says
Ys, as long as it’s a multi-surface paint or a paint specific to plastic. There are a couple linked in the post :)
Sakshi says
Hello ,
I working with acrylic paints on plastic jackets ad folders , I want to ask how can I make that paint fix on it so that it doest come out in coming in contact with wet hands and other medium. Please do guide me.
Elisabeth Adjovi says
Good Morning Amanda, i just want to thank you for you teaching. i always had a soft spot for art, but i never had the opportunity for express myself. but thanks to the internet and people like you, some of us can have the opportunity to display our talent. i am just amazed by this plastic bottle crafts and ready to explore them. but where i am in Ghana getting the appropriate color is an issue. but i am ready to comb my town for the materials and i want you to be my mentor.
thank you very much for your support
Amanda Formaro says
Good luck, I hope you are able to find what you need!
Kathie says
Hi, I bought my Grand daughter a bunch of this plastic Barbie size doll furniture for a babies nursery. It’s all in pinks and purples that don’t match. So I’m going to paint it all a white color and bought white spray paint for plastic and a primer as well. After the paint is dried well can I hand paint decorations on the furniture with acrylic paint? Let it dry before I spray a sealer? Also which sealer would you recommend? Any help or advise is great appreciated. Thank you!
Amanda Formaro says
I think that would be fine as long as you use plastic paint for the white base. Any acrylic sealer spray will do. You can find them at craft stores and in the paint section at Walmart. I have successfully several of the sealers on this page, including Mod Podge, Aleene’s, Krylon, Americana and Plaid: http://amzn.to/1mlCOLy
wendy says
I have some ten pin bowling pins that I got from a bowling alley-they are the plastic type I want to have them painted as snowmen and santa clause’s – the l that I want to paint for me says she has only worked with acrylic paint and does not think she can paint on the plastic- what can I do to them to make them paintable- she draws on them first with a fine black sharpie – any ideas would be a great help – thanks in advance
Amanda Formaro says
I would sand them with a fine grit sandpaper first, to knock off any shine. Then spray them with a plastic friendly spray paint (white) or a primer. Then paint over that :)
Lisa says
You had posted this, which I was pleased to see because I’d wanted to “stain” clear plastic to have a transparent color:
“DecoArt Glass Stains are formulated to dry clear, making them ideal for recycled plastic bottles, clear cake stands and other see through plastic items.” I’d used Americana transparent, because that was what was available & the transparent was a desired outcome. BUT, these glass stains need to be oven-cured after drying to ensure permanence on glass, but what about plastic? Does it still need to be heat cured, but just at a lower temperature?
Your advice will be truly appreciated ~Lisa
Amanda Formaro says
Hi Lisa. If in doubt, here’s the product information directly from the manufacturer’s website http://decoart.com/glasspaint/glass-stains – I have used the glass stains on plastic, here’s an example project https://craftsbyamanda.com/faux-stained-glass-mosaic-luminary/ it’s been two years since I made it and they are holding up just fine. I did not oven cure this however, only air cured.
anjana kumari says
Hi…. Thank. You. Your tips for plastic and glass painting is helpful for me.
kim says
Whew!!! Wiping sweat off my brow. you just saved my hide!!! Thanks for sharing all of this. AND I’m stealing the cute honey bear idea. I want that on my outside table!! you rock!!!
Amanda Formaro says
Thanks Kim, so glad it was helpful! :)
Sam says
Hi! I am decorating a Starbucks reusable cup (plastic) for my friend and I was wondering how I can seal in paint safely, as I am afraid to use some of the products that other people mentioned because the cup holds consumable liquid. Or is it safe to do so? Please help!
Thanks! :)
Amanda Formaro says
Any paint that you use should not come in contact with the consumable or with a person’s lips. So if you are going to paint, you would need to stop a couple of inches below the rim on the outside of the cup. There are enamel paints that are good for glass, however, those need to be baked to cure the paint. You can air cure it, but it usually takes 21 days, and that’s what you would need to do if painting on plastic. I wouldn’t recommend it if this is something they will be using and washing regularly.
Darlene says
i can’t seem to get paint to stick to a kids hobby horse I want to put outside, the sun ruins it every time I have tried, and ideas to help me?
Amanda Formaro says
Hi Darlene. Keeping things outside, especially something that kids will be riding on, is not something that the paint will be able to hold up to very well. Your best bet would probably be the outdoor spray paint for plastic furniture. It’s formulated for the outdoors.
juliet bumstead says
hi amanda
i have a couple of large plastic animals that i am going to restore. the owner wants them to go outside. i would prefer to hand paint rather than use aerosols.what exterior paint would you recommend to go on plastic. i very much look forward to your reply. thank you amanda
Amanda Formaro says
Hi Juliet. Spray paint is easiest, especially for large pieces. However, if you really don’t want to use aerosol, you can try one of the multi surface paints, like Americana or Folk Art, and I believe Martha Stewart makes one too. All three companies state that their multi surface paint is good for outdoor use. Here are the links:
http://www.plaidonline.com/multi-surface-paint/brand/detail.htm
http://decoart.com/multisurface/
http://www.dickblick.com/products/martha-stewart-crafts-multi-surface-acrylic-paint/
Lori Freese says
Hi i was givin the standing plastic nativity figures anything special i have to do for them to repaint them i dont think ill be able to replicate the colors on there so i figured i will have to or can i remove the paint on there and repaint with colors i choose
Amanda Formaro says
Hi Lori. Unless they are peeling, I would just paint a primer directly over them and then paint in the colors of your choice.
Shelley says
Hi Amanda. I’m painting clear acrylic/plastic clipboards and photo frames with names/personalized things. I need a clear sealer that will leave the frames and clipboards completely clear. I will be painting just part of them, so the rest will remain clear. The sealers I’ve tried so far leave a frosty film. Do you have any recommendations? I’d prefer a spray rather than paint-on.
Thanks so much….
Amanda Formaro says
Hi Shelley. have you tried Americana acrylic sealer spray? Definitely look for a gloss finish, I think a matte finish will leave that frosty look. Hopefully you have one set aside that you can test on? I would also check the spray paint aisle, there are so many colors and finishes now, plus clear sealers. But definitely go with gloss.
Eric says
Any special paint that would be able to be applied to plastic forks & knives – for visual purposes only? I’m trying to tint some knives so they are translucent but the paint & adhesion promoter I use eats the plastic leaving a wavy look before I can apply the color. I need smooth tinted parts. Suggestions?
Amanda Formaro says
Hi Eric
I have used Americana Multi Surface Satin on plastic spoons before and they are still doing great. No primer necessary, I just sanded the surfaces a little to knock off the shine. You can see my tutorial and the paint here
https://craftsbyamanda.com/2014/07/plastic-spoon-garden-markers.html
grainne casey says
Hi, I was thinking of painting my daughters clear plastic container for her toys. I would like to paint it on the inside so that its still shiny on the outside. Do you think this is practical or do you think the paint will just get scratched?
Amanda Formaro says
Hi Grainne. I do think it would get scratched, but if what you are trying to achieve is color showing through the outside by painting the inside, there is a possible solution. You could paint the inside, then line it with fabric. That way the inside is protected, but the paint will still show through the outside. HTH!
pooja says
hi,i want to pain plastic jars for filling cookies and adding some character to the stuff….can i use acrylic paint that we use on walls.I stay in Delhi India and cant find anything else that says its acrylic.The other option is the painting ,i mean canvas painting tubes which are also acrylic.
plz plz plz help
thanks
Amanda Formaro says
Hi Pooja. I don’t know if I will be able to help in this situation because I am not familiar with the type of paint you have available to you. What I would suggest is doing a test run with one of the plastic jars. Follow the prep instructions in this article and just paint one with the acrylic painting tubes you have available to you. I’m sorry I can’t be more help!
Julie says
Two days ago I painted two different storage containers each with one of the above spray paints listed. I wanted to see which brand worked the best. Before painting, I cleaned and lightly sanded them. I can take my finger nail and scratch the paint off still. Any suggestions on what to do. Do you think it needs more time to cure?
Amanda Formaro says
Hi Julie. I would first refer back to the back of the spray can. There is usually important information about any prepping that needs to be done to the surface, and more importantly, the temperature of the environment in which you are spraying. If the weather is too hot and humid, the paint will not be able to dry properly.
siouxz marie says
Great info, thanks do much! One question, tho…You mentioned a cake stand at the bottom of your article – would this paint not seep any chemicals into food stored on the cake container? Would it be safe to spray a bowl for instance and then use it to display fruit? Do you know if you could you wash the item frequently and it not peel?
Thanks in advance,
S
Amanda Formaro says
That’s a very good question. While there are paints that are non-toxic, none (that I know of) are approved by the FDA. Therefore food should not come in contact with the painted surface. If you were going to use a painted cake plate, I would suggest using a cardboard cake circle under the cake. And as for a painted bowl, I would line the bowl with a cloth napkin before adding food. Hope that helps!
jennette says
I was given this plastic picture of hummging bird and the out line is black. I need paint to fill in the spaces between the black for color.
Amanda Formaro says
Jennette – try one of the multi surface paints I mention in the product section above. I’m partial to the Americana brand, but have heard that martha’s is good too.
sue says
What clever ideas, glad I found your site…:-)
Amanda Formaro says
Thanks Sue!
NANCYGRACE says
Painting Basics: Plastic
as of Jan 14 2014 the link does not seem to be working. In checking out the PG site (Small logo indicated it was Home Made Simple) I could not easily find your article. I would LOVE to read it! How can I get there without the link?
Amanda Formaro says
Looks like they removed it so I’ve gone ahead and posted it here. https://craftsbyamanda.com/2013/02/tips-for-painting-on-plastic.html
Kt Boots says
I have been unable to find the page, the link doesn’t go to the article and i couldn’t find it through a search either
Amanda Formaro says
I’ve gone ahead and updated the post as I can’t find it on their site anymore. You can read it here https://craftsbyamanda.com/2013/02/tips-for-painting-on-plastic.html
Will says
I successfully painted a black plastic keyboard tray white several months ago. It got some nicks though from rough objects and the black was showing through. So, i grabbed the leftover can and sprayed the spots.
Suddenly, the newly coats spots wrinkled and look terrible now. the new white is on top of crumpled paint.
What to do? Need to keep this piece functional and working but looks terrible.
Should I resand and repaint again? Any help would be really appreciated. THANKS!!
WIll
Amanda Formaro says
Hi Will. Unfortunately you will probably have to sand and repaint. Most likely the reason the paint bubbled up like that is a reaction that it has to the oils that were most likely on the keyboard from human hands. The oils act as a repellent and push the new paint up, not letting it adhere, hence the crumpled look.
Lance says
This article is no longer available.
Amanda Formaro says
Hi Lance. Maybe the site was down when you tried. I just clicked through and the article was still there :)
Maria says
How fun! Will have to try it!
Capturing Joy with Kristen Duke says
love this, thank you!
TidyMom says
thanks, on my way to check it out
Amanda says
I have always wanted to know how to do that! Thanks!