Logo

Colorful Skull Luminaries for Halloween

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

I am all about color when it comes to crafting. There’s something about lots of different colors that just makes me smile. These skull luminaries use four common Halloween themed colors and will light up the night on Halloween! You’ll get a lot of comments and compliments on Halloween night as trick or treaters come to your door.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

They even look great during the day because of their bright and cheerful colors! Cool enough for teens but friendly and cute enough for little ones.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

I’ll show you how to make your own stencils using some contact paper and my skull patterns. The pattern is downloadable from the printable instructions below. Here’s some step by steps to help you make these.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

These luminaries originally appeared in my monthly Chicago Tribune column.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

I used Americana Multi Surface Satin on these jars. The colors I used were Pumpkin PatchIrisApple Green, Lemon Zest and Black Tie. That paint is best applied with multiple thin coats. I did two coats with a cosmetic sponge, which really helps with light application.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Dab the sponge into the paint and dab off the excess.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Then apply to the jars.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by AmandaAfter those coats had dried, I did my third coat with a paint brush.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Print out the skull pattern and place it under the clear contact paper. Trace the pattern with a pen. I tacked mine down to a piece of foam core board to hold it in place.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

It makes it a lot easier than trying to hold it in place while you trace.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Be careful when you cut these out. The natural tendency is to cut around the pattern. We need to cut INSIDE the pattern instead. Cut the skull out of the center.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Cut the eyes and the nose out. I left excess contact paper on the nose since it’s so small. It would have been next to impossible to remove the backing otherwise.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Attach the skull stencil to the jar (the jar should be completely dry!) then add the eyes. For the nose, peel the backing off first, then trim it to the right size and attach. Tweezers are handy here too. :)

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Next you’ll apply a thin coat of black paint using a cosmetic sponge. As with any stencil application, be sure to dab off most of the excess paint before applying. You will probably need two coats, apply right after the first coat.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

A tip for easier cutting. Since you don’t need to keep the inner skull portion of the stencil in tact, cut the circle of the skull out first then you can easily cut out the teeth without the contact paper from the skull getting in your way.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Another tip, this time for applying the stencil. If you start by peeling off just the bottom section and apply that first, you can peel the rest as you go.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

Once your black paint has been applied, don’t wait for it to dry. Go ahead and slowly peel off the stencil.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

The eyes and nose are admittedly a bit tricky to remove. I used the point of a craft knife to carefully lift the edge of the eye stencil. I did make a couple scratches in the paint underneath, but nothing too dramatic.

Colorful Skull Luminaries for Halloween @amandaformaro Crafts by Amanda

That’s it! Once they are dry you can display them as is or place a candle inside. I used glass votive holders with tea light candles in mine. If real candles make you nervous, you can certainly try using those LED tea lights. Happy creating and Happy Halloween!

Colorful Skull Luminaries for Halloween

Rating: 51

Colorful Skull Luminaries for Halloween

What you need:

What you do:

  1. Wash and dry your jars, then paint two coats of acrylic paint to the outside of the jar, drying between coats for 30 minutes. Allow the jars to dry completely.
  2. Draw simple skulls on a piece of paper, small enough to fit on your jar. Place a piece of contact paper over the drawing, clear side facing up. Trace the pattern onto the contact paper.
  3. You want the outside of the skull to remain intact, so cut the skull out from the inside. Cut out eyes and nose as well as you will need those separately.
  4. Press the contact paper with the skull cut-out onto the jar, making sure there are no air bubbles and that all sides and stuck down. Press the contact paper eyes and nose in place.
  5. Dip a cosmetic sponge into black paint and remove the excess paint by dabbing it up and down onto a paper towel or paper plate. With a straight up and down motion, apply paint over the top of the stencil. A second coat may be needed, but allow it to dry for just a minute or two first so you don’t lift off your first layer.
  6. Carefully remove the contact paper stencils. The pointed end of a craft knife can be used to gently coax the edge of the stencil up, but be careful not to scratch the paint.
  7. Use tea light candles or battery operated LED tea lights to illuminate your jars!

Notes from Amanda

There are special paints made for glass called enamels. Regular acrylic craft paints will work, but if you would like your luminaries to last season after season, it’s best to use enamel paints or a multi surface paint that works on glass. If you choose to use acrylic paint, spraying them with a clear gloss thick sealer will help preserve them as well.

http://craftsbyamanda.com/2013/10/colorful-skull-luminaries-halloween.html

Disclaimer: There are affiliate links to Amazon in this post. If you happen to click through AND buy something I will earn a small commission.

Me

5 Responses to Colorful Skull Luminaries for Halloween

  1. 1

    hahaha that orange one! I need it!

  2. 2
  3. 3

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>